Lazer Z E Series 60" (LRE730GKA604A3)
As the most affordable model in the Lazer Z line, the all-new 2025 Lazer Z E-Series delivers an unbeatable combination of cut quality, productivity, durability and value. Select from 48-, 52-, or 60-inch UltraCut Series 4 cutting decks, all equipped with a newly redesigned discharge chute that distributes clippings over a wider area. A choice of twin-cylinder Kawasaki, Kohler, or Vanguard twin-cylinder commercial engines are available, all equipped with heavy-duty external air filters. Power is delivered through unitized Hydro Gear pump and motor units for up to 11 mph forward ground speeds. A new full-suspension operator seat increases operator comfort during long work days.
| Item | Details |
|---|---|
| Deck Style | Floating Deck |
| Deck Style Description | Full-floating UltraCut Series 4. Side discharge standard, with molded discharge chute and option to bag or mulch. |
| Deck Construction | 10-gauge high strength alloy top that is formed and continuously seam welded, with 7-gauge side skirt, and 7-gauge reinforcement plate welded to spindle mounting locations for improved strength. |
| Cutting Heights | 1.5" to 5.5" in 0.25" increments |
| Blade Tip Speed | Approximately 18,500 fpm |
| Blades | 3 blades at 20.50" length |
|
|
|
|
|
|
|
|
|
|
| Item | Details |
|---|---|
| UPC | 193832042200 |
| Width / Cutting Deck | 60" |
| Drive | Hydro-Drive |
| Starter | Electric |
| Steering Control | Hydraulically dampened twin levers adjustable both fore and aft. Also has 2 position height adjustment. |
| Caster Forks | .50" thick caster yoke arms. |
| Front Caster Tires | 13 x 6.5-6, smooth tread, pneumatic. Sealed ball bearings. |
| Drive Tires | 24 x 12-12, 4-ply Super Turf TL |
| Safety Package | Operator Presence Controls (OPC) and drive system interlock, with safety interlock system indicators. |
| Parking Brake | Lever actuated internal wet disc brake. |
| Tractor Frame | Unibody, welded, heavy duty 1.5" x 3" tubular steel. |
| Blade Spindles | No maintenance, sealed and non-greasable spindles; 7.75" diameter cutter housing with 25mm (.98") diameter spindle shaft and splined blade driver. |
| Electrical | 12-volt battery with 15 amp alternator. |
| Standard Features | Engine meter and cup holder. |
| Seat | Deluxe suspension seat, foam flip-up armrests, and integral safety switch. Adjustment: Fore and aft from operator's position. |
| Item | Details |
|---|---|
| Width | 72.7" |
| Height | 70.1" |
| Curb Weight | 1062 lbs |
| Length | 84.6" |
| Item | Details |
|---|---|
| Engine Brand | Kawasaki® |
| Engine Model | FX730V |
| Engine Spec | FX730V-FS26-R |
| Engine Series | V-Twin |
| Engine Displacement | 726cc |
| Engine Speed | 3700 RPM |
| Fuel Type | Gas Carbureted |
| Fuel System | Carbureted |
| Fuel Capacity | 9.5-gallon single fuel tank with single fill location |
| Fuel Indicator | Mechanical float |
| Air Filter | Heavy-duty canister air filtration system |
| Transmission Speeds | Infinitely Variable |
| Speed | Infinitely variable speed selection from 0–11.0 mph forward, 0–6.0 mph reverse |
| Drive Description | Dual Hydro-Gear ZT-4400, hydrostatic transmission with charge pumps, relief valves, and independent, replaceable filters |
| Drive Wheel Release | Allows unit movement without engine running |
| PTO Engagement | MagStop Electromagnetic 175 ft-lb clutch with spot brake |
| Deck Lift | Standard; foot-controlled deck lift changes cutting height and lifts the deck to maneuver around obstacles, or place in transport position |
| Carb Compliant | No |
| ROPS | 2-post foldable ROPS standard with seat belt and latch |
